Features:
- Native signal processing by using the resolution and sampling Frequency of the source material
- The supported audio format is wav (PCM) 16/24Bit with 44.1kHz, 48kHz, 88.2kHz, 176.4kHz, 96kHz or 192kHz sampling frequency
- High quality resampling of any audio format into 16Bit/44.1kHz by applying "Bandlimited Interpolation"
- 64Bit floating point signal processing
- The signal processing chain (order of components) is freely configurable.
- Audio monitoring switchable Between input and output signal:
+ Level Meter with peak and average signal indication
+ Clipping detector
+ Correlation Meter to assure mono compatibility
+ Spectrum Analyzer
+ Oscilloscope with a 5ms time base (mono signal)
+ Vector Scope to validate the stereo and mono compatibility
- 8 band parametric Equalizer (Q, Frequency [HZ], Gain [db]) providing the following filter functions:
+ EQ (standard peak equalizer)
+ Low Shelf
+ High Shelf
+ Low Pass
+ High Pass
+ Band Pass
+ Notch
- Stereo Imager
+ Convert to mono
+ Channel balance in dB
+ Center (mono) level (0-100%)
+ Side (left & right) level (0-100%)
- Ambiophonics
+ Creating a deeper and broader sound stage by applying RACE (Recursive Ambiophonic Crosstalk Elimination): http://www.ambiophonics.org
+ RACE Attenuation (1dB to 9dB)
+ Center Presence (0% to 100%)
+ Delay depending on the sampling frequency of the source material (n x 1/Sampling Frequency)
+ Gain (-15dB to 0dB) to reduce the signal amplitude after applying RACE
- Vintage Tube Warmer/Maximizer
+ Adds harmonic distortions to simulate the behavior of a tube amplifier and compressor to warm and maximize the signal
- Compressor:
+ Input gain (-20dB to 20dB)
+ Threshold (-60dB to 0dB)
+ Ratio (1:1 up to 10:1)
+ Attack (0 - 30ms)
+ Release (0 - 2s)
+ Gain reduction indicator
+ Make up gain (0 - 30dB)
- Limiter:
+ Input gain (-20dB to 20dB)
+ Threshold (-10dB to 0dB)
+ Release (0 - 1s)
+ Gain reduction indicator
